Akemi Marble Filler Super 1 kg. - Highly Liquid Acrylic Adhesive

• Low viscosity — flows readily into fine fissures and coarse, open pores
• Very fast surface drying with fast, rigid hardening
• Excellent polishing ability for a seamless finished surface
• Transparent and can be coloured to match the stone
• Well suited as an injection resin for hairline repairs

• Filling fissures and the coarse-pored surfaces of light-coloured marble and travertine (horizontal position)
• Injection resin for fine cracks and repairs
• Gluing and filling on light-coloured natural stone

Because of its low UV stability, AKEMI® recommends AKEMI® Marble Filler Super for interior use.

1. Make sure the surfaces to be filled or bonded are clean and dry.
2. Mix the filler thoroughly with the matching AKEMI® hardener until a uniform colour is achieved. If needed, tint with AKEMI® coloring pastes to match the stone.
3. Work the filler into the fissures or pores while it is still liquid; it has a short working time, so mix only what you can apply.
4. Allow to harden, then grind and polish flush with the surrounding stone.
5. Clean tools with AKEMI® Nitro-Dilution before the material cures.

Follow the mixing ratio and cure times stated on the current AKEMI Technical Data Sheet and product label for the hardener you are using.

• Use the correct amount of hardener — too little or too much affects cure and finish.
• Do not use material that has already begun to gel or thicken.
• Test on a sample area to confirm colour match and finish before full application.
• Industrial chemical product — use only in well-ventilated areas and wear chemical-resistant gloves and eye protection. Always consult the AKEMI Safety Data Sheet (SDS) before use.

• 📄 AKEMI Stone Care Product Portal — Technical Data Sheet & SDS (manufacturer)