Akemi Akepox 5030 Knife-Grade Two-Component Epoxy Adhesive — 2.25 kg
Akemi Akepox 5030 Knife-Grade Two-Component Epoxy Adhesive — 2.25 kg
Akemi Akepox 5030 Knife-Grade Two-Component Epoxy Adhesive — 2.25 kg
AKEPOX 5030 is AKEMI's filled, solvent-free, two-component knife-grade epoxy for excellent weather-resistant bonding and filling in the visual range. Its creamy, vertically stable body holds on uneven and upright surfaces without sagging, curing to a high-strength, low-yellowing bond on marble, granite, ceramics, artificial stone, terrazzo and concrete — and bonds well to iron, steel and aluminum. Supplied in the 2.25 kg set.
| Property | Detail |
|---|---|
| Brand | Akemi |
| Product | AKEPOX 5030 (knife-grade) |
| Article Number | 11380 |
| Type | Two-component epoxy adhesive (solvent-free, filled) |
| Base Chemistry | Filled epoxy resin + (cycloaliphatic) polyamine hardener |
| Mixing Ratio | 2:1 (Part A : Part B) by weight or volume |
| Consistency | Creamy, vertically stable / knife-grade (thixotropic) |
| Color | light beige (Part A and Part B) |
| Pot Life (20°C / 68°F) | approx. 40–50 min |
| Pot Life (other temps) | 10°C: 100–130 min · 30°C: 20–30 min · 40°C: 10–15 min |
| Movable | after 6–8 hours (20°C) |
| Further Processing | after 12–16 hours (20°C) |
| Full Cure | maximum stability after 7 days (20°C) |
| Minimum Application Temp | do not use below 10°C (50°F) |
| Thermal Stability | approx. 60–70°C under load; 100–110°C not under load |
| Bending / Tensile / Compressive | 50–60 / 30–35 / 70–80 N/mm² |
| Density | approx. 1.50 g/cm³ |
| UV / Yellowing | very low tendency to yellow |
| Tintable | up to 5% with AKEPOX pastes/concentrates |
| Pack Size | 2.25 kg set |
- Creamy, vertically stable knife-grade body — no sag on uneven or upright surfaces
- Excellent weather resistance with a very low tendency to yellow
- Bonds stone and ceramics to iron, steel and aluminum in the visual range
- High strength — bending 50–60, tensile 30–35, compressive 70–80 N/mm²
- Solvent-free, 2:1 mix ratio by weight or volume
- Tintable up to 5% with AKEPOX pastes/concentrates
Bonding and filling of natural stone (marble, granite), ceramics, artificial stone, terrazzo and concrete to each other or to iron, steel and aluminum in the visual range; fillings, vertical areas, uneven surfaces, and anchoring of tiles and balustrades. Not suitable for polyolefins, silicones, Teflon, soft PVC, soft PU or butyl rubber.
- TDS (PDF) →
Wear appropriate PPE. Follow manufacturer instructions and safety regulations.