Akemi Akepox 5000 Flowing Transparent Two-Component Epoxy Adhesive — 1.5 kg
Akemi Akepox 5000 Flowing Transparent Two-Component Epoxy Adhesive — 1.5 kg
Akemi Akepox 5000 Flowing Transparent Two-Component Epoxy Adhesive — 1.5 kg
AKEPOX 5000 is AKEMI's premium, solvent-free, two-component transparent epoxy — a low-viscosity flowing resin for weather-resistant bonding and lamination in stone fabrication. Nearly colourless and with a very low tendency to yellow, it produces high-strength, dimensionally stable bonds on marble, granite, techno-ceramics, terrazzo and concrete, and works beautifully for inlay, crack filling and glass-fabric lamination. Supplied in the 1.5 kg pack.
| Property | Detail |
|---|---|
| Brand | Akemi |
| Product | AKEPOX 5000 (flowing / transparent) |
| Article Number | 10681 |
| Type | Two-component epoxy adhesive (solvent-free) |
| Base Chemistry | Epoxy resin + cycloaliphatic polyamine hardener |
| Mixing Ratio | 2:1 (Part A : Part B) by weight or volume |
| Consistency | Liquid / low-viscosity (flowing) |
| Color | colourless to slightly yellow, transparent |
| Pot Life (20°C / 68°F) | approx. 20–30 min |
| Pot Life (other temps) | 10°C: 60–70 min · 30°C: 15–20 min · 40°C: 5–10 min |
| Movable | after 6–8 hours (20°C) |
| Further Processing | after 12–16 hours (20°C) |
| Full Cure | maximum strength after 7 days (20°C) |
| Minimum Application Temp | do not use below 10°C (50°F) |
| Bending Strength | 60–70 N/mm² |
| Tensile Strength | 30–40 N/mm² |
| Density | Part A approx. 1.15, Part B approx. 1.10 g/cm³ |
| UV / Yellowing | very low tendency to yellow |
| Tintable | up to 5% with AKEPOX pastes/concentrates |
| Pack Size | 1.5 kg |
- Low-viscosity flowing resin — bonds thin joints and laminates with glass fabric
- Nearly colourless with a very low tendency to yellow
- High mechanical strength — bending 60–70 N/mm², tensile 30–40 N/mm²
- Solvent-free, weather-resistant, dimensionally stable bond
- 2:1 mix ratio by weight or volume
- Tintable up to 5% with AKEPOX pastes/concentrates
Weather-resistant bonding of natural stone (marble, granite), techno-ceramics, artificial stone, terrazzo and concrete; inlay and restoration, crack filling, embedding/reinforcing and lamination with glass fabric. Also bonds many plastics, wood, glass and paper. Not suitable for polyolefins, silicones, Teflon, soft PVC, soft PU or butyl rubber.
- TDS (PDF) →
- SDS Part A (PDF) →
- SDS Part B (PDF) →
Wear appropriate PPE. Follow manufacturer instructions and safety regulations.